Boiler Plus is additional legislation to Part L of the Building Regulations, introduced by BEIS (the Department of Business, Energy and Industrial Strategy). It sets out new requirements for gas engineers fitting new boilers and heating controls, with the aim of reducing domestic carbon emissions and encouraging energy efficiency.
Changes to the minimum requirements when installing boilers in existing buildings came into force on April 6th 2018. Currently ENGLAND only.
This is part of the Government’s Clean Growth Strategy, aimed at cutting carbon emissions to combat climate change while driving economic growth.
Gas engineers who don’t comply are breaching the Building Regulations and are therefore breaking the law and could face prosecution and fines of up to £5,000. This is policed by Building Control, and the Gas Safe Register can also refer safety concerns to the HSE (Health and Safety Executive).
Furthermore, if a gas engineer were to invoice a consumer for non-compliant work, it could be considered fraudulent and therefore open to action from Trading Standards.
Homeowners who knowingly allow non-compliant work to be carried out could also face prosecution and fines of up to £5,000.
WHAT ARE THE BOILER PLUS REQUIREMENTS?
A minimum of 1 of these measures must be adhered to for all combination boilers. The additional measures are as follows;
A device, or feature within a device, which maintains the temperature inside the building by sensing and limiting the temperature of the water circulating through the heat generator and heat emitters in relation to the temperatures measured outside the building.
(SAP 2012) – note that devices drawing weather data from the internet also comply.
A device, or feature within a device, which adjusts the temperature of the water circulating through the heating system according to the temperature measured inside the building.
When fitted to a condensing boiler a flue gas heat recovery system (FGHRS) recovers heat from the flue products to pre-heat the domestic hot water supply.
Smart controls offering load compensation or whether compensation would be fully compliant with the new standard:
Automation is a function that allows the device to automatically control the heating system output in response to programmed demand or occupancy detection. Advanced examples detect where householders are, such as through sensor data or geolocation based on smartphone data.
Optimisation means the device calculates how long it takes the property to reach the desired comfort level, and times the system’s operation to minimise the amount of work it has to do. Usually, it also modulates the output of the boiler in a similar way to load compensation, so as little fuel as possible is consumed.
At MASTER GAS, we are fully equipped to handle any, and all of these situations, and can guide you to the perfect choice for your installation. Although BOILER PLUS is a new legislation, the technologies featured in the new standards are all existing, established technologies, which are already familiar to our installers.
Nearly all heating industry manufacturing companies have their own product that is compatible with BOILER PLUS, and it takes hours of research to know every product. Our team have taken the time to know them all, because we don’t think you should have to do this.
Please talk to one of our team members and we would be happy to help find what’s right for you.
323 total views, 2 views today
There might be a few reasons why it is you’re running out of hot water so fast.
After the pilot light to a water heater no more remains lit, it generally implies the thermocouple is awful. If the generator or the wiring in the device can’t feel heat in the pilot, then it will always shut off it. Fixing the thermocouple will normally take care of the issue.
When a thermocouple replacement is necessary or if a brand new water heater is essential, a Master Gas specialist can help determine which version is ideal for your home and budget. We provide 24-hour emergency water heater support in order that we could diagnose the issue and you may have hot water as swiftly as possible. Call us on 07948-009319
111 total views, no views today
DIY pipes can be gratifying work and undoubtedly saves you cash, but it is not all sunshine and ceramic. Many plumbing mistakes created by amateurs may be expensive concerning water damage, security and time wasted. Learning about these frequent plumbing errors will be able to allow you to plan smarter for prospective endeavours.
So many jobs end in water harm since people forget to close off the water source. Before you eliminate clear or pipes P-traps, be certain that you switch off the water either to a particular fixture or the entire home.
Often, if you do not have the ideal tools, you may make a problem worse or reevaluate the circumstance. Always research the resources you’ll need for every job and buy or lease accordingly. If you are intending several extensive DIY jobs, the hand tools are worth, and the spider is well worth renting.
Regardless of what you are doing, do not rely solely on liquid drain cleaner, organic or otherwise. First, attempt a plunger and also a hand-cranked drain snake for more clogs that cannot be plunged. That having been said, stirring frequently solves the issue.
Frequently you can be wrapped up in a DIY job which you don’t understand when to call it quits. Sometimes you do not have the ideal tools; additional times you have made the problem worse. At a specific stage, the job may proceed beyond your ability level or relaxation zone. When that occurs, you can telephone us 07948-009319. We are pleased to consider where you left off in your job or take the entire watery mess off your hands from the beginning.
93 total views, no views today